Macrom Syn Tech 4.075 Manual de usuario descargar pdf (Pagina 10)

TECHNICAL DATA

Power IHF 202 650W

RMS Power at (12.5 Volts DC)

Front/Rear at 1 kHz < 0.08 % THD+N at 4 Ohm 4 x 75 W

Front/Rear at 1 kHz < 0.5 % THD+N at 2 Ohm 4 x 150 W

Front/Rear at 1 kHz < 0.5 % THD+N Mono at 4 Ohm 2 x 300 W

Pre-Out Sensitivity 1:1

High pass, Front and Rear (30-600)Hz

Low pass, Front and Rear (30-600)Hz

Crossover slope 12 dB/Octave

Response in frequency +/- 1 dB 10 - 50.000 Hz

Total harmonic distortion 0.08%

Weighted IHF A Signal-Noise Ratio > 100 dB

Input sensitivity - Impedance 200-4000 mV/22 kOhm

Loudspeaker impedances

Stereo min. 2 Ohms

Mono min. 4 Ohms

Power supply 14.4 V DC

(11 - 16 V permissible)

Weight 5,1 kgrs

Dimensions 212(I) x 67(H) x 445(D) mm

Due to the continual incorporation of improvements in this product, the characteristics and

design may be subject to variation without prior notice.

O/M ST 4.075x 25/06/02 18:31 Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Sin comentarios

Macrom Syn Tech 4.075 Manual de usuario Pagina 10