Macrom Syn Tech 2.100x Manual de usuario descargar pdf (Pagina 8)

CONTROLS AND INDICATORS

6 • Continuous adjustment of the Pre-output Low-Pass or High-Pass frequencies: once

the high-pass or low-pass filter is inserted, the crossover frequency can be

adjusted between 30 Hz and 600 Hz in continuous mode.

7 • Pre-output Crossover selector: selects the Pre-output mode, activating the Low-Pass or

High-Pass filter.

a) Flat: a signal will be present on the Pre-output, in

relation to the signal applied at the input of the amplifier.

b) Low-Pass: activation of the low-pass filter, i.e.

determination of the finishing-point of the low frequencies

present at the Pre-output Outputs.

c) High-pass: activation of the low-pass filter, i.e.

determination of the starting-point of the high frequencies

present at the Pre-output Outputs.

8 • Pre-output Output Connector: it is possible to connect a supplementary amplifier for use

according to a previously selected mode.

15 • Selector switch for the External Low Frequency Control: this

switch activates or deactivates the external control of the low

frequencies.

16 • Port for EBC connection: By means of the appropriate EBC control

it is possible to act on the level of the

low frequencies between 0dB and -

40dB.

600

125

300

Flat Low High

20Hz 20kHz

Flat Low High

20Hz 30 > 600Hz

Flat Low High

20kHz30 > 600Hz

OnOff

External Bass Control

Min Max

Peak

O/M ST 2.100x 25/06/02 18:23 Page 8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

Sin comentarios

Macrom Syn Tech 2.100x Manual de usuario Pagina 8