Macrom Syn Tech 2.100 Manual de usuario descargar pdf (Pagina 10)

TECHNICAL DATA

Power IHF 202 500W

RMS Power at (12.5 Volts DC)

at 1 kHz < 0.08 % THD+N at 4 Ohm 2 x 100W

at 1 kHz < 0.5 % THD+N at 2 Ohm 2 x 200W

at 1 kHz < 0.5 % THD+N Mono at 4 Ohm 1 x 400W

Pre-Out Sensitivity 2V

High pass control, (30-600) Hz

Low pass control, (30-600) Hz

Crossover slope 12 dB/Octave

Response in frequency +/- 1 dB 10 - 50.000 Hz

Total harmonic distortion 0.08%

Weighted IHF A Signal-Noise Ratio > 100 dB

Input sensitivity - Impedance 200-4000 mV/22 kOhm

Loudspeaker impedances

Stereo min. 2 Ohms

Mono min. 4 Ohms

Power supply 14.4 V DC (11 - 16 V permissible)

Weight 4,7 kgrs

Dimensions 212(L) x 67(A) x 405(P) mm

Due to the continual incorporation of improvements in this product, the characteristics and

design may be subject to variation without prior notice.

O/M ST 2.100 25/06/02 18:28 Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Sin comentarios

Macrom Syn Tech 2.100 Manual de usuario Pagina 10